Hazard caused by battery cell explosion during protective testing process.
| Nominal Specification | 220L |
| Internal Size | 30.7"×26.8"×8.7" 780mm×680mm×220mm |
| External Size | 37.4"×38.6"×46.5" 950mm×980mm×1180mm |
| Net Weight | 200kg |
Battery safety performance testing involves tests such as overcharging, overdischarging, and short-circuit testing. The explosion-proof chamber(WFB-220L-2K) provides a safe testing environment for battery testing, ensuring the safety of the experiments.
All-around product tour.Each zone is equipped with three explosion-proof bars, two on the left side and one on the right side. The explosion-proof chamber is fitted with a explosion-proof transparent window to provide the protection for testing personnel if battery explosion happened. Additionally, the three-layer explosion-proof glass designed allows for dynamic observation of the testing conditions inside the chamber, enabling real-time monitoring of the testing progress.
The external wall is made of high-quality cold-rolled steel plate, with surface spray coating and paint treatment. The inner wall is made of 0.06" (1.5mm) stainless steel plate. The interior of the chamber is reinforced with epoxy insulation boards to ensure testing safety.
Featuring a unique connector aperture design, each enclosure is equipped with two connector holes on the left and right sides externally, as well as two 90mm diameter lead holes on the rear wall internally. This design effectively eliminates complex wiring issues. All connector apertures are equipped with protective grommets to securely fasten the leads in place.
● Protective Ground Wire
● Short Circuit Protection
● Explosion-proof Light
Each enclosure is equipped with ventilation ducts connected to external air ducts at the top. The top of the enclosure has two external air ducts that are fitted with exhaust fans for ventilation and heat dissipation.
