Flawless in milliseconds, precision beyond limits.

Unit modularity, powerful performance.

±0.01% F.S.
Voltage Accuracy
±0.01% F.S.
±0.01% F.S.
Current Accuracy
±0.01% F.S.
100Hz
Recording Frequency
100Hz
≤1ms
Current Response Time
≤1ms
500ms
Minimum Pulse Width
500ms
1GB/CH
Off-Line Test
1GB/CH

Stable performance parameters to ensure accurate and reliable test data. At the same time, the product adopts modular design with each unit having 2 channels, which can be independently data acquisition.

All-around product tour.

4-range switching,
precision defined.

4 current ranges from 0.5μA ~ 0.1mA, 0.1mA ~ 1mA, 1mA ~ 10mA , 10mA ~100mA can be selected  to realize the controllable accuracy of small current in small range.

NEWARE-CT-8002Q-5V100mA-Battery tester 4 current ranges:0.5μA ~ 0.1mA, 0.1mA ~ 1mA, 1mA ~ 10mA , 10mA ~100mA

Perpetual dedication to safety protection.

● Discharge Data Protection 

● Offline Testing Function 

● Voltage Upper Limit Setting 

● Voltage Lower Limit Setting 

● Current Upper Limit Setting 

● Current Lower Limit Setting 

● Capacity Upper Limit Setting 

● Delay Time Setting

NEWARE-CT-8002Q-5V100mA-Battery tester Numerous feature Settings for security protection

Tiny current, magnified vision.

Delicate measurements at μA-level current, uncovering the essence of testing.

The NEWARE-CT-8002Q-5V100mA-Battery tester can record Delicate measurements at μA-level current through the battery test system

Work scenarios simulated.
Enhanced data support.

Based on NEWARE 5th generation test system architecture, it can perform Cycle Life Test, Rate Charging / Discharging Test, Pulse Simulation Test, HPPC, etc. Meanwhile, it can simulate the actual driving road conditions of electric vehicles by dynamic power or current waveform.

Cycle Life Test
Rate Charging / Discharging Test
Pulse Simulation Test
HPPC
simulate the actual driving road conditions of electric vehicles by dynamic power or current waveform

Multiple testing modes.
One equipment, unlimited capabilities.

Cycle life test
Rate Charging / Discharging Test
Pulse simulation test
GITT Test
DCIR test
dQ/dV differential capacity curve

Tailored for advanced battery testing: enabling dQ/dV differential capacity curve analysis capability.

dQ/dV differential capacity curve analysis graph

Powerful programmability.
Meet diverse testing needs.

The software is fully functional, covering a variety of work-step settings, recording, and data storage to meet a wide range of testing needs.

DBC Configuration
  CC & CV charge/discharge test
500ms pulse width
Segmented recording
DBC Configuration
CC & CV charge/discharge test
500ms pulse width
Segmented recording
Support import/edit/export of DBC files. Different battery pack protocols can be communicated by simply modifying the code of the DBC protocol file without upgrading the program.
CC charging or discharging until the voltage reaches the specified value, and then seamlessly switching to CV mode for battery compensation which is smooth without any spikes.
Testing the performance of the battery under fast changes in current/power.
Allow to set up to 3 segment recording conditions per step, including voltage, current and time.

Extensive peripheral devices.
Create a multi-dimensional testing environment.

Integrated peripheral devices such as Auxiliary Voltage, Auxiliary Temperature, and Environmental TestChambers for comprehensive testing and evaluation, providing multi-dimensional and quantifiable support for battery mass production testing.

NEWARE-CT-8002Q-5V100mA-Battery tester can connect to a variety of Integrated peripheral uses such as: Auxiliary Voltage, Auxiliary Temperature, and Environmental Test Chambers
CT-8002Q-5V100mA-124-neware-2024

Technical Specifications

Equipment name CT-8002Q-5V100mA
Input power supply AC 220V ±10% / 50Hz
Input power 25 W
Resolution ratio AD:24bit;DA:16bit
Input impedence ≥1GΩ
Voltage
Voltage range per channel 10mV~5V
Minimum discharge voltage -5 V
Accuracy ± 0.01% of F.S.
Stability ± 0.01% of F.S.
Current
Current range per channel Range 1:0.1 mA;
Range 2:1 mA;
Range 3:10 mA;
Range 4:100 mA
Accuracy ± 0.02% of F.S.
Constant pressure cut-off current Range 1: 0.1 μA;
Range 2: 1 μA;
Range 3: 10 μA;
Range 4: 100 μA
Stability ± 0.02% of F.S.
Power
Max power per channel 0.5 W
Accuracy ± 0.03% of F.S.
Stability ± 0.03% of F.S.
Time
Current response time ≤1ms(10% ~ 90% of F.S.)
Charge and discharge conversion time ≤20ms
Time range of work step (365 * 24) hours / work step
Supported in time format: 00:00:00:00 (h, min, s, ms)

Want to explore further?
Download our product technical specifications for more.

Download

CT-8002Q-5V100mA

We offer powerful auxiliary equipments
and accessories to provide comprehensive testing support for battery testing.

We offer powerful auxiliary equipments and accessories to provide comprehensive testing support for battery testing.

NEWARE and Cookies
We use Cookie to personalize and improve your experience with our website. By continuing to browse the site you are agreeing to our use of cookies.