NEWARE battery tester software glossary-Battery test

HOME Glossary Software

Glossary

Hardware Module

Product Features

Product Parameters

Protect

During the test, if the battery parameters meet the protection conditions of the test process, the battery test will be stopped automatically.
Unit ID

Logical ID of the device.
SIM

The properties test of battery under the simulation of electric vehicles in different states.
Lowest discharge voltage

The lowest allowable lower limit of the test instrument when the battery is discharged.
Voltage accuracy

The relative error between the actual output voltage and the theoretical output voltage.
Constant voltage cut-off current

The current at which the battery terminates the test while the voltage remains constant.
Charging and discharge conversion time

The time required to transition from a charging step to a discharge step.
Constant current discharge

Discharge with a constant current.
Constant voltage discharge

Discharge with a constant voltage.
C-rate

The current value for a battery to deliver rated capacity at certain duration, it equals to the ratio of current/nominal capacity.
Cut-off condition

Cut-off conditions of the running work steps.
Cut-off C-rate

Take C-rate as the Cut-off condition for the work steps.

NEWARE and Cookies

We use Cookie to personalize and improve your experience with our website. By continuing to browse the site you are agreeing to our use of cookies.