BTSDA

HOME Glossary Software BTSDA

Glossary

Hardware Module

Product Features

Product Parameters

Voltage limit protection

When the voltage exceeds the maximum and minimum values, the device starts the protection state.
Current limit protection

When the current exceeds the maximum and minimum values, the device starts the protected state.
Capacity minimum limit protection

If the current working power is greater than or equal to the set value, the channel is protected.
Constant voltage charge

Charge with a constant voltage.
Constant current and constant voltage charge

Charge with constant current and constant voltage.
Constant current and constant voltage discharge

Discharge with constant current and constant voltage.
Pack constant current constant voltage

Charge with constant current and constant voltage on battery packs
Constant power charge

Charge with a constant power.
Direct Current Internal Resistance

Test the ratio of voltage change to current change of the battery under operating conditions.
Voltage vibration difference

If the ΔV between the voltage of the first data of the rest step and the last voltage of the previous step exceeds the set value, the channel will be protected.
Deviation condition

When the absolute value of the ΔV between the main channel and the auxiliary channel exceeds the set value, the voltage callback check deviation will not be judged.
Protect

During the test, if the battery parameters meet the protection conditions of the test process, the battery test will be stopped automatically.

NEWARE and Cookies

We use Cookie to personalize and improve your experience with our website. By continuing to browse the site you are agreeing to our use of cookies.