Global Distributor Recruitment | Create the Future of Battery Testing Together
Click here to easily get the hang of using BTS!
Open the preset rate test procedure and let the battery rest for 1 hour to stabilize its internal state.
The study is on the anode material of potassium ion batteries, so the batteries are first tested for discharge.
Setting the constant current discharge step.
After selecting the C-rate mode, enter the nominal specific capacity of the material and the mass of the active substance at the bottom of the page.
Then enter the rate, the corresponding current can be calculated automatically.
You can also not select the C-rate mode, directly input current can be.
The nominal specific capacity of the carbon material studied in this experiment was 279 mAh/g.
Input mass of active material 2mg.
Set the multiplication rate gradient to 0.1C, 0.2C, 0.5C, 1C, 2C, 5C, 10C, 1C.
10 cycles at each rate provides a relatively comprehensive evaluation of the battery, saving time and resources.
The embedded potassium potential of the material is between 0.1~1.0V.
So choose the test voltage window of 0.01V~2.5 V.
Avoid overcharging/overdischarging of battery materials.
Gradient of rate and number of cycles per rate can be set according to the requirement.
The above demonstration parameters are for reference only, please refer to your own experiments.
After setting the parameters of the work step, just click start.
This operation video tutorial is applicable to the following products: ● CT-4000 Battery Testing System Series (CT-4008Q-5V100mA, CT-4008Q-5V6A-S1, CT-4008Q-5V6A-164, CT-4008Q-5V12A-S1, CT-4008Q-5V12A-164, etc.)● CE-6000 Battery Testing System Series (Cell, Module, Pack, etc.)● CT/CTE-8000 Battery Testing System Series (CT-8002Q-5V100mA, CTE-8008-5V200A, etc.)● All-in-One Battery Testing System Series (WHW-25L-S-16CH, WIHW-200-160CH-B, WHW-100L-2-160CH, WHW-500L-5V6A80CH-380V, WGDW-380L-2-40BFC-5V600A8CH, etc.)
Previous
Next
Open the pre-set cyclic test step file.First set aside for 1 hour to stabilize the internal area of the battery.Since the cathode material was studied, the constant current charging work step was set
Open the pre-set rate test step file.First set aside for 1 hour to stabilize the internal area of the battery.Since the cathode material was studied, the constant current charging work step was set up
Open the preset cycle test procedure and let the battery rest for 1 hour to stabilize its internal state.The study is on the anode material of potassium ion batteries, so the batteries are first teste
Turn on the pre-set cycle test work step file.First set aside for 3 hour to allow the battery to stabilize internally.Since the study was on anode materials, the battery was first discharged.Setting t
Open the pre-set rate work step file.First set aside for 3 hour to allow the battery to stabilize internally.Since the study is on anode materials, the constant current discharge step is set up first.
September 08, 2024
Nova Scotia has a growing battery technology cluster comprised of academic researchers at Dalhousie University and innovative industry players that are actively involved in the development of advanced battery technology. The IBA 2024 Annual Meeting in Halifax, NS, will be an ideal opportunity to link your organization with world-wide renowned battery researchers in a new center for battery R&D and to discuss exciting ideas in fundamental battery materials research and practical applications.
August 05, 2024
With the wide application of batteries in our current mobile society, the safety issues of batteries have become one of the top concerns. Emerging in-situ/operando characterizations, advanced experimental approaches, and modeling methodologies have been proposed to enhance understanding of the fundamental science of battery safety behaviors and provide powerful design tools for the next-generation safe battery.
July 15, 2024
SolidState ionics is the fundamental underpinning science behind many of the electrochemical technologies needed to achieve net zero, such as fuelcells, electrolysers to produce green hydrogen, Li and sodium batteries for transport and grid storage.The focus of this conference will be how to promote basic research, materials discovery and materials processing for application in the electrochemical devices urgently needed to achieve the green energy transition. We will also focus on the ……
July 03, 2024
ENERGY STORAGE ASIA 2024, featured prominently at ASEAN SUSTAINABLE ENERGY WEEK, will serve as a hub for cutting-edge energy storage technologies from leading brands worldwide. It offers a unique opportunity for industry professionals to connect with high-quality suppliers, catering to the energy sector, and even the electric vehicle industry. This show is set to be a pivotal platform for industry players to explore new opportunities and collaborations in the dynamic energy landscape.
June 23, 2024
Welcome to The International Symposium on Polymer Electrolytes (ISPE-18)The International Symposium on Polymer Electrolytes (ISPE-18) Conference is organized by the American Chemical Society (ACS) Mal
June 16, 2024
IMLB 2024 | The 22nd International Meeting on Lithium BatteriesThe IMLB 2024 Scientific and Organizing Committees are pleased to invite you to the 22nd International Meeting on Lithium Batteries in Ho
